Glued or clicked vinyl flooring; read carefully and decide the RIGHT one for your home

 Vinyl flooring is one of the main flooring options for indoor areas, especially for the living room and bedroom. There are two main types, pasted and clicked.

Who is going to invest in this alternative is in doubt: after all, which vinyl flooring to buy? Here, we talk in detail about each one of them and when their use is most indicated. Follow and find out!

Glued or clicked vinyl flooring;  read carefully and decide the RIGHT one for your home

Vinyl flooring: what is it?

principle, it is important to clarify what vinyl flooring is. It is a coating made with PVC and other elements, such as a mineral filler, additive, plasticizer and pigment.

The characteristics of the floor vary according to its composition. For example, if it has more mineral load, it is less scratch resistant. Therefore, it should not be installed in areas with an intense flow of people.

The vinyl floor is very versatile, so much so that it can be installed in living rooms , bedrooms and kitchens. Its installation in wet areas, such as the bathroom, is not recommended. In this case, there is a risk of the plates coming loose in the short term.

In addition, it is not suitable for the garden or backyard. As they are external areas, frequent contact with rain and sun can cause damage to the material.

Glued vinyl flooring

Glued vinyl flooring

glued vinyl flooring

This is the best known type of vinyl flooring and is available in ruler, board and blanket. In all cases, the glued vinyl flooring is applied using a special adhesive that is spread on the subfloor.

It is a type that can be applied to the standard subfloor or over existing coatings. This is the case with ceramic tiles, granite and polished marble.

However, the original coating needs to be in good condition. If there are imperfections, it is important to correct them. In many cases, this adjustment is made with the use of self-leveling putty.

It is also recommended that the subfloor be firm, dry and clean, otherwise the vinyl will not adhere well or will have significant imperfections.

Therefore, it is always recommended to hire specialized labor to carry out the installation, in order to guarantee a better result.

After installation, the glued vinyl flooring sticker needs seven days to dry. During this period, it is not advisable to wash it, just sweep it, as the humidity can compromise the curing stage and lead to the pieces becoming detached.

clicked vinyl flooring

clicked vinyl flooring

clicked vinyl flooring

Clicked vinyl flooring is only available in planks and boards. Its application on the subfloor is through a male-female fitting system, with click on the ends. Therefore, it does not require the use of adhesive.

The other application characteristics are similar to those of glued vinyl, such as the possibility of being installed on the existing subfloor or coating, the need for leveling and that there is no dirt or moisture on the surface.

But pay attention to one detail: most clicked vinyl floors cannot be installed over existing floors, as they are more flexible. If your intention is to apply the coating on top of another, check if the manufacturer indicates this possibility.

In general, the rigid versions of the floor allow installation over an existing coating in the area. So look for these alternatives.

Glued or clicked vinyl flooring: which one to choose?

Both are effective and deliver a beautiful result to the decor. However, your choice should be made based on some factors.

Among them, highlight for the agility of installation. Clicks can be done throughout the room in up to 48 hours, which is why they are the best alternatives for those in a hurry to finish the work.

advertising

The glued ones, on the other hand, have a seven-day cure time, so they are not ideal for those who need to release the property for short-term use., about Hardwood refinishing  in St augustine Beach 

On the other hand, the pasted version has a greater variety of format, pattern and color, which does not happen with the clicked model. Therefore, if your main point is the aesthetics of the floor, glued is the best option.

How to care for glued and clicked vinyl

On both floors , it is recommended to sweep or use a vacuum cleaner to remove dust. Then, wipe with a cloth dampened with water and liquid soap. Finish by wiping with a clean, dry cloth.

If you want to wash the floor, this is only possible in the glued version and you must not leave puddles of water. It is not recommended to wash the clicked, as water can enter through the fittings and accumulate on the subfloor.